Home / Audio/video Devices / Home Stereo/theater Equipment / 1X2 HDMI OVER CAT6 EXTENDER SPLITTER KIT POC 4K 60HZ 4:4:4

1X2 HDMI OVER CAT6 EXTENDER SPLITTER KIT POC 4K 60HZ 4:4:4

$208.69

Tripp Lite 1×2 HDMI Over Cat6 Extender / Splitter Kit PoC 4K @ 60Hz 4:4:4 – 2 Input Device – 2 Output Device – 125 ft Range – 2 x Network (RJ-45) – 2 x HDMI In – 2 x HDMI Out – 4K – 3840 x 2160 – Twisted Pair – Category 6 – TAA Compliant

SKU: B127-2A1-HH UPC: 0037332253880 Brand: Tripp Lite Condition: New Categories: , ,

Description

Tripp Lite 1×2 HDMI Over Cat6 Extender / Splitter Kit PoC 4K @ 60Hz 4:4:4 – 2 Input Device – 2 Output Device – 125 ft Range – 2 x Network (RJ-45) – 2 x HDMI In – 2 x HDMI Out – 4K – 3840 x 2160 – Twisted Pair – Category 6 – TAA Compliant

Features

HDMI Splitter Ideal for Digital Signage or Displaying Video in Schools or Trade Show Booths

This complete transmitter and receiver system is recommended for home theaters and video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127-2A1-HH splits and extends a 4K video and stereo audio signal from an HDMI source device to two HDMI displays up to 125 feet (38.1 meters) away via user-supplied Cat6 cabling.

Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks

Built-in Power over Cable (PoC) technology powers the low-profile receiver over Cat6 cable. Green and orange LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver away from an AC outlet.

Transmits Crystal-Clear 4K HDMI Video with Multi-Channel Audio and 4:4:4 Color

The B127-2A1-HH supports Ultra HD video resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. Built-in equalization automatically fine-tunes the image quality at the remote displays with no time-consuming manual fiddling needed. It’s compatible with HDMI 2.0 standards for carrying HDR signals, which provide a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks. HDCP 2.2 compliance allows you to stream iTunes and Netflix content with no complications. This kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.

Plug-and-Play Operation for Quick Setup and Immediate Use

The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing the units on walls, poles or 19-inch racks. Connect the transmitter to the source and the receiver to the displays with user-supplied HDMI cables (such as Tripp Lite’s P568- or P569-Series). Then, connect the two units using Cat6 Ethernet cable (such as Tripp Lite N202-Series cable). Connect an optional display to the transmitter’s local HDMI output to monitor the image connected to the receiver up to 125 feet away.

TAA-Compliant for GSA Schedule Purchases

The B127-2A1-HH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Typical Applications

  • Connect a media server, Blu-ray player, cable/satellite box, Roku, gaming system or other home theater component to large-screen 4K televisions or projectors
  • Upgrade the video quality of your trade show presentation or digital signage installation in a commercial or educational setting to 4K x 2K
  • Set up digital signage with a single video signal being transmitted to multiple displays

System Requirements

  • Source device with HDMI output (Blu-ray player, cable box, laptop)
  • Display devices with HDMI input (HDTV, projector, monitor)

Additional information

Product Type

Video Extender Transmitter/Receiver

Transmitter Depth

2.46"

Twisted Pair Cable Standard

Category 6

Package Contents

Transmitter Unit Receiver Unit External power supply (Input: 100-240V) 4 x International plug adapters (North America, Europe, U.K. and Australia) Mounting Hardware Owner's Manual

Country of Origin

Taiwan

Environmental Certification

REACH

Transmitter Height

1.06"

Transmitter Width

4.53"

Receiver Height

1.06"

HDMI In

Yes

Receiver Width

4.53"

Receiver Depth

2.46"

Transmitter Weight (Approximate)

7.20 oz

Receiver Weight (Approximate)

7.20 oz

Product Color

Black

Graphics Modes

4K

HDMI Out

Yes

Number of HDMI Outputs

2

Connectivity Technology

Wired

Number of Input Devices Supported

2

Brand Name

Tripp Lite

Maximum Operating Distance

125 ft

Number of Network (RJ-45) Ports

2

Number of HDMI Inputs

2

Media Type Supported

Twisted Pair

Number of Output Devices Supported

2

TAA Compliant

Yes

Network (RJ-45)

Yes

Manufacturer Part Number

B127-2A1-HH

Manufacturer Website Address

http://www.tripplite.com

Manufacturer

Tripp Lite by Eaton

Product Model

B127-2A1-HH

Product Name

B127-2A1-HH Video Extender Transmitter/Receiver

Marketing Information

Features HDMI Splitter Ideal for Digital Signage or Displaying Video in Schools or Trade Show Booths This complete transmitter and receiver system is recommended for home theaters and video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127-2A1-HH splits and extends a 4K video and stereo audio signal from an HDMI source device to two HDMI displays up to 125 feet (38.1 meters) away via user-supplied Cat6 cabling. Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks Built-in Power over Cable (PoC) technology powers the low-profile receiver over Cat6 cable. Green and orange LEDs on both the transmitter and receiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver away from an AC outlet. Transmits Crystal-Clear 4K HDMI Video with Multi-Channel Audio and 4:4:4 Color The B127-2A1-HH supports Ultra HD video resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. Built-in equalization automatically fine-tunes the image quality at the remote displays with no time-consuming manual fiddling needed. It's compatible with HDMI 2.0 standards for carrying HDR signals, which provide a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks. HDCP 2.2 compliance allows you to stream iTunes and Netflix content with no complications. This kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Plug-and-Play Operation for Quick Setup and Immediate Use The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing the units on walls, poles or 19-inch racks. Connect the transmitter to the source and the receiver to the displays with user-supplied HDMI cables (such as Tripp Lite's P568- or P569-Series). Then, connect the two units using Cat6 Ethernet cable (such as Tripp Lite N202-Series cable). Connect an optional display to the transmitter's local HDMI output to monitor the image connected to the receiver up to 125 feet away. TAA-Compliant for GSA Schedule Purchases The B127-2A1-HH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts. Typical Applications Connect a media server, Blu-ray player, cable/satellite box, Roku, gaming system or other home theater component to large-screen 4K televisions or projectors Upgrade the video quality of your trade show presentation or digital signage installation in a commercial or educational setting to 4K x 2K Set up digital signage with a single video signal being transmitted to multiple displays System Requirements Source device with HDMI output (Blu-ray player, cable box, laptop) Display devices with HDMI input (HDTV, projector, monitor)

Maximum Video Resolution

3840 x 2160


0
    0
    Your Cart
    Your cart is emptyReturn to Shop