Previous
Previous Product Image

42U RACK ENCLOSURE CABINET NETWORK SERVER DOORS SIDES 2000LBS

$1,128.22
Next

RACK ENCLSURE SERVER CABINET 55U W/ DOORS AND SIDE PANELS

$2,069.71
Next Product Image

45U RACK ENCLOSURE CABINET NETWORK SERVER EXPANSION NO SIDES

$1,154.65

Tripp Lite 45U Rack Enclosure Server Cabinet Doors No Sides 3000lb Capacity – 45U Rack Height x 19″ Rack Width – Black – 2250 lb Dynamic/Rolling Weight Capacity – 3000 lb Static/Stationary Weight Capacity

Hurry! only 3 left in stock.
SKU: SR45UBEXP UPC: 0037332174772 Brand: Tripp Lite Condition: New Categories: , ,

Description

Tripp Lite 45U Rack Enclosure Server Cabinet Doors No Sides 3000lb Capacity – 45U Rack Height x 19″ Rack Width – Black – 2250 lb Dynamic/Rolling Weight Capacity – 3000 lb Static/Stationary Weight Capacity

The SR45UBEXP is an expansion model used when several cabinets are bayed together. It has doors and a roof but no side panels. Its integrated baying tabs make it easy to combine multiple enclosures in rows fro data center application. The SR45UBEXP is also compatible with hot aisle/cold aisle configurations.The SR45UBEXP houses 3000lbs of standard 19-inch rack equipment in 45U. Offers vendor-neutral square hole/cage nut mounting for guaranteed compatibility with all EIA-310-E compliant 19″ equipment. Its front and rear pairs of vertical rails are adjustable in quarter-inch increments from 4 to 37 inches. Adjustment is quick and an easy-view depth index ensures consistent rail placement without requiring time-consuming measurements. Each rack space within the enclosure is numbered for ready reference. Two of these adjustable vertical mounting rails support toolless button-mount 0U installation of up to four compatible PDUs and cable managers. This feature makes it easier to route cabling to rack equipment and reduces cord clutter.The top panel of the SR45UBEXP is vented to help remove warm air from the enclosure and draw in cool air by convection. The top panel includes ports for cable routing, and can be quickly removed without tools. To facilitate cable access, the SR45UBEXP is open-bottom.All components of the SR45UBEXP are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility earth ground. The removable front and rear doors feature quick-release ground wires.To simplify deployment, the SR45UBEXP comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving the enclosure over long distances.The SR45UBEXP comes with a 5-year product warranty. As part of the SmartRack family, the SR45UBEXP is compatible with Tripp Lite’s extensive range of rackmount accessories, enabling you to customize your solution to meet any requirement.

Additional information

Product Type

Rack Cabinet

Product Model

SR45UBEXP

Static/Stationary Weight Capacity

3000 lb

Units Per Pallet

1

Environmental Certification

RoHS

Environmentally Friendly

Yes

Country of Origin

China

Package Contents

45U SmartRack Premium Enclosure (No Side Panels Included)2 x Door Keys50 x M6 Cage Nuts50 x M6 Screws50 x M6 WashersOwner's ManualMounting HardwareStabilizing Bracket

Additional Information

EIA-310-E CertificationUL60950 ApprovalToolless accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure)Front and rear sets of equipment mounting rails adjust in 1/4" increments. Adjustment is quick and convenient. The easy-view depth index ensures consistent rail placement without requiring time-consuming measurementsMassive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirementsMaximum usable internal depth of 37 inches/94 cm (front to rear rail)Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 600mm or 24" to match standard data center floor tilesCasters are pre-installed and support a rolling load capacity of 2250 lbs, allowing the enclosures to be pre-configured and rolled to the final installation location. Casters are removableLeveling feet extend to allow enclosure to be positioned on uneven floors. Levelers are removableCompact design allows the enclosure to roll through standard height commercial doorwaysConvenient grounding system. All components are grounded to the enclosure frame which includes multiple connections for facility ground. Front and rear doors include quick-release ground wiresOpen bottom for cable accessTop panel has generous cable access holes. Panel can be removed toollessly in seconds without having to disconnect cables first

Marketing Information

The SR45UBEXP is an expansion model used when several cabinets are bayed together. It has doors and a roof but no side panels. Its integrated baying tabs make it easy to combine multiple enclosures in rows fro data center application. The SR45UBEXP is also compatible with hot aisle/cold aisle configurations.The SR45UBEXP houses 3000lbs of standard 19-inch rack equipment in 45U. Offers vendor-neutral square hole/cage nut mounting for guaranteed compatibility with all EIA-310-E compliant 19" equipment. Its front and rear pairs of vertical rails are adjustable in quarter-inch increments from 4 to 37 inches. Adjustment is quick and an easy-view depth index ensures consistent rail placement without requiring time-consuming measurements. Each rack space within the enclosure is numbered for ready reference. Two of these adjustable vertical mounting rails support toolless button-mount 0U installation of up to four compatible PDUs and cable managers. This feature makes it easier to route cabling to rack equipment and reduces cord clutter.The top panel of the SR45UBEXP is vented to help remove warm air from the enclosure and draw in cool air by convection. The top panel includes ports for cable routing, and can be quickly removed without tools. To facilitate cable access, the SR45UBEXP is open-bottom.All components of the SR45UBEXP are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection to the facility earth ground. The removable front and rear doors feature quick-release ground wires.To simplify deployment, the SR45UBEXP comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where it can be secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for moving the enclosure over long distances.The SR45UBEXP comes with a 5-year product warranty. As part of the SmartRack family, the SR45UBEXP is compatible with Tripp Lite's extensive range of rackmount accessories, enabling you to customize your solution to meet any requirement.

Product Line

SmartRack

Product Name

45U SmartRack Premium Enclosure (No Side Panels Included)

Manufacturer

Tripp Lite by Eaton

Weight (Approximate)

222.67 lb

Manufacturer Website Address

http://www.tripplite.com

Manufacturer Part Number

SR45UBEXP

Product Color

Black

Product Family

SmartRack

Depth

43"

Width

26.6"

Height

83.8"

Brand Name

Tripp Lite

Rack Height

45U

Rack Width

19"

Dynamic/Rolling Weight Capacity

2250 lb

0
    0
    Your Cart
    Your cart is emptyReturn to Shop