AMP DSP 4X200W 70.7/100V 1RU
$1,233.41
AtlasIED DPA804 Amplifier – 400 W RMS – 4 Channel – 1% THD – 20 Hz to 20 kHz – 794 W – Ethernet
Description
AtlasIED DPA804 Amplifier – 400 W RMS – 4 Channel – 1% THD – 20 Hz to 20 kHz – 794 W – Ethernet
The AtlasIED DPA804 amplifier features a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA804 is a DSP controlled four-channel amplifier that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.
The DPA804 can be used right out of the box in its factory default configuration as a traditional four-channel 70.7V commercial power amplifier requiring no programming, special set-up, or network connectivity. However, the DPA804 can be configured in four-channel mode with either 4Ω or 8Ω load impedances for two stereo zones. Many system designs require both low and high impedance amplification. The DPA804 can be configured for a 70.7V/100V paging/background system on two channels and the other two channels can be used for 4Ω/8Ω foreground stereo applications.
The DPA804 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 four-channel Dante™ receiver card or a DPA-AMIX (2) mic/line and (2) AUX input card, for a total of eight inputs. All inputs can be mixed and routed to any of the four amplifier channels. All amplifier channels have an assortment of DSP tools including level controls, EQs, limiters, high & low pass filters, and delay to provide flexibility for a range of applications.
The output level can be assigned to either the front panel potentiometers or to the onboard GUI. Wired remote level controls can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet, or mobile device using a web browser. All settings can be password protected.
Additional information
Audio Channels | 4 |
---|---|
Product Name | DPA804 Multi-Channel Network Amplifier |
Minimum Frequency Response | 20 Hz |
Operating Power Consumption | 794 W |
Depth | 15.5" |
Width | 19" |
Height | 1.8" |
Weight (Approximate) | 13 lb |
Environmental Certification | WEEE |
Environmentally Friendly | Yes |
Certifications & Standards | TÜV |
Package Contents | DPA804 Multi-Channel Network Amplifier Power Cord |
Marketing Information | The AtlasIED DPA804 amplifier features a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA804 is a DSP controlled four-channel amplifier that can be configured in three different amplification arrangements to meet a wide range of installation design requirements. The DPA804 can be used right out of the box in its factory default configuration as a traditional four-channel 70.7V commercial power amplifier requiring no programming, special set-up, or network connectivity. However, the DPA804 can be configured in four-channel mode with either 4Ω or 8Ω load impedances for two stereo zones. Many system designs require both low and high impedance amplification. The DPA804 can be configured for a 70.7V/100V paging/background system on two channels and the other two channels can be used for 4Ω/8Ω foreground stereo applications. The DPA804 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 four-channel Dante™ receiver card or a DPA-AMIX (2) mic/line and (2) AUX input card, for a total of eight inputs. All inputs can be mixed and routed to any of the four amplifier channels. All amplifier channels have an assortment of DSP tools including level controls, EQs, limiters, high & low pass filters, and delay to provide flexibility for a range of applications. The output level can be assigned to either the front panel potentiometers or to the onboard GUI. Wired remote level controls can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet, or mobile device using a web browser. All settings can be password protected. |
Product Series | DPA |
Product Model | DPA804 |
RMS Output Power | 400 W |
Manufacturer | AtlasIED |
Manufacturer Website Address | |
Manufacturer Part Number | DPA804 |
Product Family | DPA |
USB | No |
Maximum Frequency Response | 20 kHz |
Wireless LAN | No |
Ethernet | Yes |
Bluetooth | No |
Classification | AB |
Brand Name | AtlasIED |
Impedance | 4 Ohm |
Product Type | Amplifier |
Total Harmonic Distortion (THD) | 1% |