ETHERNET TO TO 4 ANALOG I/O SELECT CURRENT/VOLTAGE -22 +176F

IO Channels IO Protocols Modbus TCP or DCON ASCII (over TCP or Virtual COM port) Description 4 Analogue Outputs Digital Inputs 0 Digital Outputs 0 Analog Inputs 0 Analog Outputs 4 Watchdog When device comms is lost, outputs can be set to predetermined state Power On Values Outputs can be set to predetermined values on power on Analog IO Output Voltage Ranges 0-10V Output Current Ranges 0-20mA or 4-20mA Output Current Type Sink (requires external current source) Output Measurement Resolution 12 Bit Max Output Load Current (voltage mode) ±5mA Max Output Load Voltage (current mode) 30V Output Accuracy 0.1% of FSR @ 25°C / 77 °F Output Voltage Drift (Voltage Mode) Zero drift less than 30µV/°C, span drift less than 25ppm/°C Output Current Drift (Current Mode) Zero drift less than 0.2µA/°C, span drift less than 25ppm/°C Output Slew Rate Voltage Mode: 170 kV/s, Current Mode: 4.3A/s Output Settling Time Voltage Mode: 350µs, Current Mode: 4 µs Serial Port Serial Gateway RS485 NuDam/ADAM compatible expansion port Network Number of Ports 1 Network Port Type RJ45 Jack 10/100 MHz Autosensing, Cross Over Autosensing (MDIX) Network Protocols ICMP, IP, TCP, DHCP, HTTP Protection 1500V Magnetic Isolation between ports and network Power Power Input 5V – 30V DC Redundant DC Dual Power Inputs, reverse polarity protected Power Supply 1 Description Global Power Supply – PW-600 Power Supply 2 Description Power supply PW-650 Max Input 35 Volts Power Consumption 2.5 Watt Max General Operating Temperature Range -30 °C to +80 °C / -22 °F to +176 °F Industrial Standard Yes