EXTERIOR WASH 310 10DEG US A EXTERIOR WASH 310 10DEG US ALU

Color mixing: RGBW Intensity: 0 – 100% Control systems: DMX, RDM Setting, addressing, standalone programming: Control panel with OLED display Stand-alone control: Up to 20 scenes with global fade/hold times DMX channels: 3-5 depending DMX mode Receiver: RS-485 DMX compliance: USITT DMX512-A Firmware update: Serial upload via DMX link Light source: 30 x RGBW quad-color LEDs Minimum LED lifetime: 50,000 hours (to >70% luminous output) LED manufacturer: Cree Beam Angle Options: No diffuser: 11° Narrow diffuser: 13° Medium diffuser: 27° Wide diffuser: 43° Very wide diffuser: 62° Asymmetric diffuser: 66° x 15° CRI (Color Rendering Index) : > 70 Total luminous output: 8300 lumens Ingress protection rating: IP66 Surface treatment: Anodized and electrostatic powder-coated Effective Projected Area (EPA): 0.14 m² including snoot Impact resistance: IK08 (with control panel display cover plate installed) Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944) Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6) 0,7g RMS Random (IEC 60068-2-64) Mounting: Adjustable yoke Orientation: Any Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.) Power connection: 1.8 m (5.9 ft.) cable tail without connector Power input cable type, EU models: H05RN-F 300/500V, 3 x 0.75 mm2, Ø 7 mm Power input cable type, US models: SJOW 18AWG, 300V, WL F1, Ø 8 mm Data connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tail All cable entries: IP68 cable gland Typical half-cycle RMS inrush current: 10.9 A Power supply unit: Integrated, auto-sensing multi-voltage Maximum total power consumption: 300 W Surge protection: 4 KV 100 V,