HDMI MM FIBER OPTIC TRANSMITTER HDMI MULTI-MODE
$1,155.30
ComNet HDMI Transmitter – Single Channel – 1 Input Device – 3280.84 ft Range – 1 x HDMI In – 1 x ST Ports – Full HD – 1920 x 1080 – Rack-mountable
Description
ComNet HDMI Transmitter – Single Channel – 1 Input Device – 3280.84 ft Range – 1 x HDMI In – 1 x ST Ports – Full HD – 1920 x 1080 – Rack-mountable
The ComNet™ FVT/FVR(X)MI[/M] features an HDMI™ fiber link for uncompressed high-resolution bi-directional communication with full HDCP copyright protection, EDID and CEC connection functionality. The high-resolution signal is transmitted over one multimode fiber using multiple wavelengths up to 1000m. Resolutions of up to 1080p60 are supported. HDCP encryption is not affected or compromised by the FVT/FVR(X)MI units. The FVT/FVR(X)MI[/M] transmits pixel-for-pixel images and full 24-bit scan rate with no contouring or bit reduction. This unit is fully compatible with HDMI™ compliant sources and monitors, supporting all possible horizontal and vertical sync configurations. The CEC support provided by these units allows the user to communicate with up to ten CEC-enabled devices connected via HDMI™. The FVT/FVR(X)MI[/M] transmits up to 8 channels of uncompressed audio at sample sizes of 16-bit, 20-bit and 24-bit, with sampling rates of 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz. This series also supports any IEC 61937-compliant compressed audio stream, such as Dolby Digital and DTS , and up to 8 channels of one-bit DSD audio, as used on SA CD/Super Audio CDs, and at rates up to four times that of Super Audio CD, and lossless compressed audio streams such as Dolby True HD and DTS -HD Master Audio. A locking screw prevents the connectors from accidental disconnection. Packaged in either a small stand-alone housing or the exclusive ComNet ComFit housing, the FVT/FVR(X)MI standard size product may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.
Additional information
Product Type | Video Extender Transmitter |
---|---|
Number of ST Ports | 1 |
Graphics Modes | Full HD |
Input Voltage | 230 V AC |
Transmitter Width | 5.30" |
Transmitter Height | 1.10" |
Length | 6.1" |
Environmental Certification | WEEE |
Environmentally Friendly | Yes |
Country of Origin | United States |
Certifications & Standards | FCCCEcULus |
Package Contents | HDMI Transmitter – Single ChannelDC Plug-in Power Supply, 90-264 VAC, 50/60 Hz |
HDMI In | Yes |
Connectivity Technology | Wired |
Marketing Information | The ComNetâ„¢ FVT/FVR(X)MI[/M] features an HDMIâ„¢ fiber link for uncompressed high-resolution bi-directional communication with full HDCP copyright protection, EDID and CEC connection functionality. The high-resolution signal is transmitted over one multimode fiber using multiple wavelengths up to 1000m. Resolutions of up to 1080p60 are supported. HDCP encryption is not affected or compromised by the FVT/FVR(X)MI units. The FVT/FVR(X)MI[/M] transmits pixel-for-pixel images and full 24-bit scan rate with no contouring or bit reduction. This unit is fully compatible with HDMIâ„¢ compliant sources and monitors, supporting all possible horizontal and vertical sync configurations. The CEC support provided by these units allows the user to communicate with up to ten CEC-enabled devices connected via HDMIâ„¢. The FVT/FVR(X)MI[/M] transmits up to 8 channels of uncompressed audio at sample sizes of 16-bit, 20-bit and 24-bit, with sampling rates of 32 kHz, 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz and 192 kHz. This series also supports any IEC 61937-compliant compressed audio stream, such as Dolby Digital and DTS , and up to 8 channels of one-bit DSD audio, as used on SA CD/Super Audio CDs, and at rates up to four times that of Super Audio CD, and lossless compressed audio streams such as Dolby True HD and DTS -HD Master Audio. A locking screw prevents the connectors from accidental disconnection. Packaged in either a small stand-alone housing or the exclusive ComNet ComFit housing, the FVT/FVR(X)MI standard size product may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate. |
Product Name | HDMI Transmitter – Single Channel |
Manufacturer | ACRE |
Manufacturer Website Address | |
Manufacturer Part Number | FVT1MI |
Number of Input Devices Supported | 1 |
Media Type Supported | Optical Fiber |
Number of HDMI Inputs | 1 |
Maximum Operating Distance | 3280.84 ft |
Brand Name | ComNet |
Form Factor | Rack-mountable |
Maximum Video Resolution | 1920 x 1080 |