Free Shipping
Free Returns
Easy Payments
Sign up For our Blog
Trade in Welcome
Buy or Lease
Previous
Previous Product Image

14 MODULE CHASSIS 2X 48VDC PWR FOR FLEXPOINT MEDIA CONVERTERS

$1,035.82
Next

OMNICONVERTER FPOE/S 2X 100 SFP TO 1X 10/100 POE RJ45 US AC PWRED

$555.22
Next Product Image

ICONVERTER T1/E1 RJ45/48 COPPER TO FIBER LC MM 1310NM 5KM WIDE TEMP

$620.94

Omnitron Systems T1/E1 Managed Media Converter – 1 x Network (RJ-45) – 2 x LC Ports – DuplexLC Port – Multi-mode – Ethernet – T1/E1 – 3.11 Mile – Power Supply – Wall Mountable, Plug-in Module

SKU: 8706-0W UPC: 0800975032767 Brand: Omnitron Systems Condition: New Categories: , ,

Description

Omnitron Systems T1/E1 Managed Media Converter – 1 x Network (RJ-45) – 2 x LC Ports – DuplexLC Port – Multi-mode – Ethernet – T1/E1 – 3.11 Mile – Power Supply – Wall Mountable, Plug-in Module

The iConverter T1/E1 is a T1 (1.544Mbps) or E1 (2.048Mbps) copper to fiber media converter, and is available as a compact unmanaged standalone unit or a managed chassis plug-in module. The iConverter T1/E1 can be used to extend the demarcation point between service provider and networking equipment.

The iConverter T1/E1 media converters operate in pairs, extending distances over fiber, which improves noise immunity, quality of service, intrusion protection and network security.

The T1/E1 supports both standard and CWDM Small Form Pluggable (SFP) transceivers, enabling adaptability to different fiber types, distances and wavelengths, providing maximum flexibility across a variety of network architectures and topologies.

The T1/E1 also supports multimode and single-mode dual fiber with ST, SC and LC connectors; and single-mode single-fiber with SC connectors.

Designed as a transparent repeater, the iConverter T1/E1 supports standard T1, E1 and Primary Rate Interface (PRI), voice or data. The converter also supports AMI, B8ZS and HDB3 line codes. DIP-switches provide easy configuration of T1/E1 line codes and line build-out.

The iConverter T1/E1 features user-selectable Local Loopback, Force 1s to Copper, Force 1s to Fiber, and Fiber Optic Test modes to facilitate diagnosis of the remote unit, eliminating the cost of external hardware or support personnel at each end of a link.

The copper interface features an RJ-48 connector for balanced T1/E1 applications, and models featuring coaxial BNC connectors are available for unbalanced E1 applications.

The hot-swappable plug-in module can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. It can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC or DC powered chassis.

The T1/E1 standalone unit is available as a wall-mount unit. The wall-mount models are DC powered and are available with an external AC to DC power adapter or a terminal connector for DC power.

Additional information

Product Type

Transceiver/Media Converter

Manufacturer Part Number

8706-0-W

Width

0.9"

Height

2.8"

Weight (Approximate)

8 oz

Environmental Certification

RoHS 2

Environmentally Friendly

Yes

Country of Origin

United States

Fiber Optic Wavelength

1310 nm

Fiber Optic Cable Standard

50/125 µm

Management Port

No

Marketing Information

The iConverter T1/E1 is a T1 (1.544Mbps) or E1 (2.048Mbps) copper to fiber media converter, and is available as a compact unmanaged standalone unit or a managed chassis plug-in module. The iConverter T1/E1 can be used to extend the demarcation point between service provider and networking equipment. The iConverter T1/E1 media converters operate in pairs, extending distances over fiber, which improves noise immunity, quality of service, intrusion protection and network security. The T1/E1 supports both standard and CWDM Small Form Pluggable (SFP) transceivers, enabling adaptability to different fiber types, distances and wavelengths, providing maximum flexibility across a variety of network architectures and topologies. The T1/E1 also supports multimode and single-mode dual fiber with ST, SC and LC connectors; and single-mode single-fiber with SC connectors. Designed as a transparent repeater, the iConverter T1/E1 supports standard T1, E1 and Primary Rate Interface (PRI), voice or data. The converter also supports AMI, B8ZS and HDB3 line codes. DIP-switches provide easy configuration of T1/E1 line codes and line build-out. The iConverter T1/E1 features user-selectable Local Loopback, Force 1s to Copper, Force 1s to Fiber, and Fiber Optic Test modes to facilitate diagnosis of the remote unit, eliminating the cost of external hardware or support personnel at each end of a link. The copper interface features an RJ-48 connector for balanced T1/E1 applications, and models featuring coaxial BNC connectors are available for unbalanced E1 applications. The hot-swappable plug-in module can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with any combination of redundant AC, 24VDC or 48VDC power supplies. It can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC or DC powered chassis. The T1/E1 standalone unit is available as a wall-mount unit. The wall-mount models are DC powered and are available with an external AC to DC power adapter or a terminal connector for DC power.

Product Series

T1/E1

Product Name

T1/E1 Managed Media Converter

Manufacturer

Omnitron Systems

Manufacturer Website Address

http://www.omnitron-systems.com

LC Port Type

Duplex

Maximum Distance Supported

3.11 Mile

Total Number of Ports

3

Fiber Mode Supported

Multi-mode

Media Type Supported

Twisted Pair

Number of LC Ports

2

Product Family

T1/E1

Network (RJ-45)

Yes

Number of Network (RJ-45) Ports

1

DVI

No

USB

No

Ethernet Technology

Ethernet

Brand Name

Omnitron Systems

Network Technology

T1/E1

Form Factor

Plug-in Module

Power Source

Power Supply

Depth

4.5"

0
    0
    Your Cart
    Your cart is emptyReturn to Shop