Previous
Previous Product Image

RACK CABINET INROW COOLING UNIT AIR CONDITIONING 33 000 BTU

$7,156.05
Next

TEMPERATURE KIT FOR SELECT PRECISION AIR CONDITIONING SYSTEMS

$1,807.54
Next Product Image

IN-ROW PRECISION COOLING SYSTEM 12 KW 41 000 BTU 208-240V 42U

$12,576.61

Tripp Lite In-Row Precision Cooling System – 12 kW (41,000 BTU/hr), 208-240V, 42U, 300mm – Indoor In-row Air Conditioning Unit for Server Rooms

Hurry! only 12 left in stock.
SKU: SRCOOLDXRW12 UPC: 0037332250674 Brand: Tripp Lite Condition: New Categories: , ,

Description

Tripp Lite In-Row Precision Cooling System – 12 kW (41,000 BTU/hr), 208-240V, 42U, 300mm – Indoor In-row Air Conditioning Unit for Server Rooms

Slim Air Conditioning System Saves Space While Delivering Primary Precision Cooling
This SmartRack® in-row precision air conditioning system is the ideal cooling option for your small-to-medium data center, IT room or other edge location. Typical CRAC/CRHC units are too large for these locations, but the SRCOOLDXRW12 cools your mission-critical equipment while occupying very little floor space, supporting up to 12.8kW (43,686 BTU/hr) of heat load per unit. The cabinet is just 300 millimeters wide, making it easy to position optimally within a row for precision close-coupled cooling. It requires the same front and rear clearance as a standard rack enclosure.

Uses DX Technology to Deliver Cool Air to Loads
This direct expansion (DX) cooling system pulls unconditioned air through the rear of the unit, cools it with condensed refrigerant and delivers it to equipment loads with up to 43,686 BTU/hour and more than 1,475 CFM airflow. EC fans and a variable speed compressor provide variable airflow and constant temperature based on room conditions.

High Cooling Efficiency Saves You Money
Inverter compressor and EC fan technology automatically regulate cooling output to match heat load and conserve energy during off-peak hours, lowering your overall energy costs and lengthening the lifespan of the equipment being cooled. The close-coupled design captures heat at the source to improve energy efficiency by 25% over traditional perimeter CRACs. In addition, the SRCOOLDXRW12 is ideally sized for your small-to-medium data center at virtually any density, saving you the cost of a raised floor or an overbuilt/overprovisioned CRAC unit. It uses eco-friendly R410A refrigerant, reflecting your commitment to environmental responsibility.

Easy to Operate with the Color Touchscreen
You have total control over the SRCOOLDXRW12 using the front-panel color touchscreen interface, which lets you monitor and access system configuration and status information. A built-in controller detects and manages data center temperatures, automatically adjusts cooling levels and supports various control modes. Intelligent temperature control and variable speed technology allow precise airflow and temperature adjustment to match specific load requirements closely without wasting energy on overcooling.

Reconfigure Your Cooling Needs as Your Equipment Needs Change
The modular, in-row cabinet design easily facilitates expansion or movement on its built-in casters, allowing your increasing cooling needs to be reconfigured as your data center grows. A simple redundancy model (N+1) is built in as part of the number of scalable units to be deployed.

Pre-Installed WEBCARDLXMINI Network Interface Offers 24/7 Access
Remote access to the SRCOOLDXRW12 can save you the time and expense of having someone constantly on-site. The built-in WEBCARDLXMINI lets you manage temperatures, receive alerts, review logs and control settings 24/7 via HTTP(S), menu/CLI via SSH/Telnet and SNMP for integration with management software platforms such as DCIM. The ability to configure settings and monitor alarms off-site can bolster your bottom line.

Additional information

Application/Usage

Server

Package Contents

Indoor In-row Air Conditioning Unit Outdoor Condenser Side Discharge Panels / Adapters Hardware Kits Owner's Manual

Depth

43.3"

Width

11.8"

Height

78.7"

Weight (Approximate)

397 lb

Environmental Certification

RoHS

Environmentally Friendly

Yes

Country of Origin

China

Additional Information

INPUT Electrical Consumption (Max) : 4.8 kW Nominal Input Voltage(s) Supported : 208V AC; 240V AC Maximum Input Amps : 16 Input Connection Type : 3-wire / 4-wire + Ground Input Frequency : 50/60 Hz COOLING Cooling Type : Active Airflow : 1,475 CFM Cooling Capacity (BTUs) : 43,686 Cooling Capacity (kW) : 12.8 USER INTERFACE, ALERTS & CONTROLS Front Panel LEDs: 7-inch color touchscreen ENVIRONMENTAL Storage Temperature Range : -40 to 140 degF Operating Elevation (ft.) : 0 to 13,000 Operating Temperature : 4 to 115 degF Operating Humidity Range : 5 to 80% Ambient Operation RH : 5 to 80% Condensate Drain Pumps (L/HR) : Max distance 150ft (45m), max lift 26.5ft (8m) Condensate Water Drains : 1/4 in. Connection FEATURES & SPECIFICATIONS Compressor Type : Rotary (Inverter Driven) Refrigerant : R410a (Environmentally friendly, Non ozone depleting) Refrigerant Amount : 12.1 lb. / 5.0 kg (Nominal) Sound Level (Noise) : 78 DBA @ 1475 CFM @ 1 METER Fans (Type/Quantity) : 0-2000 RPM x 3 OPERATION Operation Mode : Cooling, Standby, Off, Maintenance Mode Supply Air Temperature (Celsius) : 18-27 deg. C (limited by heating load) Applied Containment Types : Close/Open Fan Controls : Automatic Force Modes : Maintenance Mode, Rotation Mode Installation Modes : Condenser above or slightly below In-Row; vertical condenser. Manual Modes : Service and factory setting menus for manual adjustment Power Redundancies : Single only System Type Selections : Deg. F; Deg. C (default is Deg. F) Temperature Unit Selections : Deg. F; Deg. C (default is Deg. F) STANDARDS & COMPLIANCE

Product Type

Cooling System

Marketing Information

Slim Air Conditioning System Saves Space While Delivering Primary Precision CoolingThis SmartRack® in-row precision air conditioning system is the ideal cooling option for your small-to-medium data center, IT room or other edge location. Typical CRAC/CRHC units are too large for these locations, but the SRCOOLDXRW12 cools your mission-critical equipment while occupying very little floor space, supporting up to 12.8kW (43,686 BTU/hr) of heat load per unit. The cabinet is just 300 millimeters wide, making it easy to position optimally within a row for precision close-coupled cooling. It requires the same front and rear clearance as a standard rack enclosure. Uses DX Technology to Deliver Cool Air to LoadsThis direct expansion (DX) cooling system pulls unconditioned air through the rear of the unit, cools it with condensed refrigerant and delivers it to equipment loads with up to 43,686 BTU/hour and more than 1,475 CFM airflow. EC fans and a variable speed compressor provide variable airflow and constant temperature based on room conditions. High Cooling Efficiency Saves You MoneyInverter compressor and EC fan technology automatically regulate cooling output to match heat load and conserve energy during off-peak hours, lowering your overall energy costs and lengthening the lifespan of the equipment being cooled. The close-coupled design captures heat at the source to improve energy efficiency by 25% over traditional perimeter CRACs. In addition, the SRCOOLDXRW12 is ideally sized for your small-to-medium data center at virtually any density, saving you the cost of a raised floor or an overbuilt/overprovisioned CRAC unit. It uses eco-friendly R410A refrigerant, reflecting your commitment to environmental responsibility. Easy to Operate with the Color TouchscreenYou have total control over the SRCOOLDXRW12 using the front-panel color touchscreen interface, which lets you monitor and access system configuration and status information. A built-in controller detects and manages data center temperatures, automatically adjusts cooling levels and supports various control modes. Intelligent temperature control and variable speed technology allow precise airflow and temperature adjustment to match specific load requirements closely without wasting energy on overcooling. Reconfigure Your Cooling Needs as Your Equipment Needs ChangeThe modular, in-row cabinet design easily facilitates expansion or movement on its built-in casters, allowing your increasing cooling needs to be reconfigured as your data center grows. A simple redundancy model (N+1) is built in as part of the number of scalable units to be deployed. Pre-Installed WEBCARDLXMINI Network Interface Offers 24/7 AccessRemote access to the SRCOOLDXRW12 can save you the time and expense of having someone constantly on-site. The built-in WEBCARDLXMINI lets you manage temperatures, receive alerts, review logs and control settings 24/7 via HTTP(S), menu/CLI via SSH/Telnet and SNMP for integration with management software platforms such as DCIM. The ability to configure settings and monitor alarms off-site can bolster your bottom line.

Product Name

Indoor In-row Air Conditioning Unit

Product Model

SRCOOLDXRW12

Manufacturer

Tripp Lite by Eaton

Manufacturer Website Address

http://www.tripplite.com

Manufacturer Part Number

SRCOOLDXRW12

Product Color

Black

Brand Name

Tripp Lite

Product Material

Aluminum

0
    0
    Your Cart
    Your cart is emptyReturn to Shop