NETWORK SPLITTER

$739.35

Bosch Network Splitter

SKU: PRS-NSP UPC: 0800549242660 Brand: Bosch Condition: New Categories: , ,

Description

Bosch Network SplitterThe network splitter is used in a network to provide two branches from the main cable run. It can use an external DC power supply, or it can use the power supply from the network controller. The unit automatically switches to the local power supply unit when it is connected to it, reducing the power drain on the main network. The network splitter can also function as a repeater, effectively extending the length of the main network another 50 meters.

Functions

The splitter inserts Praesideo units connected to a tapoff into the main network, however without the redundancy of the main loop. The maximum current supplied for each of the two tap-offs is separately selectable. External power from the local supply is used only for the tap-offs, and is not fed into the main system cable. The network splitter has two LEDs for diagnostic purposes.

Controls and indicators

  • Power status LED
  • Fault status LED
  • Jumpers to configure tap-offs power behavior

Interconnections

  • Two system network connections for main network
  • Two system network connection for network tap-offs
  • External power supply input

Additional information

Product Type

Signal Splitter

Brand Name

Bosch

Manufacturer Part Number

PRS-NSP

Manufacturer Website Address

http://www.bosch.com

Packaged Quantity

1

Manufacturer

The Bosch Group

Product Name

Network Splitter

Marketing Information

The network splitter is used in a network to provide two branches from the main cable run. It can use an external DC power supply, or it can use the power supply from the network controller. The unit automatically switches to the local power supply unit when it is connected to it, reducing the power drain on the main network. The network splitter can also function as a repeater, effectively extending the length of the main network another 50 meters. Functions The splitter inserts Praesideo units connected to a tapoff into the main network, however without the redundancy of the main loop. The maximum current supplied for each of the two tap-offs is separately selectable. External power from the local supply is used only for the tap-offs, and is not fed into the main system cable. The network splitter has two LEDs for diagnostic purposes. Controls and indicators Power status LED Fault status LED Jumpers to configure tap-offs power behavior Interconnections Two system network connections for main network Two system network connection for network tap-offs External power supply input

Package Contents

PRS-NSP Network Splitter 1 x Mounting Bracket 1 x Power Supply Connector

Weight (Approximate)

1.59 lb

Height

1.3"

Width

9.6"

Depth

3.3"

Input Voltage

56 V DC


0
    0
    Your Cart
    Your cart is emptyReturn to Shop