TR-700 BELT PACK RTS A5F HEADSET JACK B4 BAND
$969.25
Telex TR-700UHF Single-Channel Wireless Transceiver – Wireless – Beltpack
Description
Telex TR-700UHF Single-Channel Wireless Transceiver – Wireless – BeltpackBat/Overmod Light (BAT/OM)
Light will flash once when unit is turned on if the battery is good. If the light stays on, battery is low. If the light does not flash, battery is dead. A normal microphone gain setting will cause the LED to flash at the beginning of most words at normal speech levels. If the gain is too high, the LED will be red during the complete word at normal speech levels.
On/Off Volume Control
Turns the beltpack power on and controls head set volume
Talk Button
Press to enable the audio path to either Intercom Channel A or B or A + B, from the local headset microphone. The associated “TALK” LED, #6, will turn red when enabled. A quick press and release latches the talk function, unless latching has been disabled. Holding the button for over ½ second, will cause the audio path to be enabled only for as long as the button is held. If the talk function is latched on, pressing the talk but ton again will turn it off.
Talk Light
Will turn red when enabled by associated TALK or WTA button
Additional information
Product Type | Intercom Sub Station |
---|---|
Manufacturer | The Bosch Group |
Width | 3.8" |
Height | 5.1" |
Weight (Approximate) | 16 oz |
Package Contents | TR-700UHF Single-Channel Wireless TransceiverAntenna |
Additional Information | Current Draw: 140 mA Push-to-Talk, Talk On Distortion: < 1 % at full deviation Frequency Band of Operation: 518 – 608 MHz, 614 – 740 MHz, 796 – 868 MHz in 18 MHz TX and RX bands Frequency Response: 300 Hz-8 kHz Function: User Station IF Selectivity 3 dB at 230 kHz Image Rejection: 70 dB or better Local Headset Output: 40 mW output into 600Ω 1% Distortion Microphone Input Sensitivity: 7 mV RF Frequency Stability: 0.01 % RF Sensitivity: < 0.7 µV for 12 dB SINAD Squelch Quieting: 90 dB Squelch Threshold: 20 dB SINAD Transmit Power: 50 mW Max. Auto-power reductionA5F Headset Jack |
Marketing Information | Bat/Overmod Light (BAT/OM) Light will flash once when unit is turned on if the battery is good. If the light stays on, battery is low. If the light does not flash, battery is dead. A normal microphone gain setting will cause the LED to flash at the beginning of most words at normal speech levels. If the gain is too high, the LED will be red during the complete word at normal speech levels.On/Off Volume Control Turns the beltpack power on and controls head set volumeTalk Button Press to enable the audio path to either Intercom Channel A or B or A + B, from the local headset microphone. The associated "TALK" LED, #6, will turn red when enabled. A quick press and release latches the talk function, unless latching has been disabled. Holding the button for over ½ second, will cause the audio path to be enabled only for as long as the button is held. If the talk function is latched on, pressing the talk but ton again will turn it off.Talk Light Will turn red when enabled by associated TALK or WTA button |
Product Name | TR-700UHF Single-Channel Wireless Transceiver |
Product Model | TR-700 |
Manufacturer Website Address | |
Number of Channels | 1 |
Manufacturer Part Number | TR-700-B4R5 |
Number of Batteries Supported | 6 |
Battery Size Supported | AA |
Product Color | Black |
Brand Name | Telex |
Form Factor | Beltpack |
Connectivity Technology | Wireless |
Power Source | Battery |
Depth | 1.7" |